globalchange  > 气候变化与战略
DOI: 10.1016/j.atmosenv.2020.117321
论文题名:
Comparative analysis of ventilation efficiency on ultrafine particle removal in university MakerSpaces
作者: Secondo L.E.; Adawi H.I.; Cuddehe J.; Hopson K.; Schumacher A.; Mendoza L.; Cartin C.; Lewinski N.A.
刊名: Atmospheric Environment
ISSN: 1352-2310
出版年: 2020
卷: 224
语种: 英语
英文关键词: 3D printers ; Air pollution ; Air quality ; Buildings ; Indoor air pollution ; Nanoparticles ; Office buildings ; Ventilation ; Comparative analysis ; Engineering controls ; Environmental health ; Indoor air quality ; Particle concentrations ; Particle number concentration ; Ventilation efficiency ; Volatile organic emissions ; Quality control ; 1,3 butadiene ; 2 propanol ; acetic acid ethyl ester ; acetone ; acetonitrile ; alcohol ; polylactic acid ; air quality ; building ; comparative study ; efficiency measurement ; health risk ; indoor air ; nanoparticle ; risk factor ; ventilation ; volatile organic compound ; air quality ; airborne particle ; Article ; comparative study ; engineering ; knowledge ; microplastic pollution ; particle size ; priority journal ; room ventilation ; three dimensional printing ; university
学科: Air pollution ; Buildings ; Environmental health ; Indoor air quality ; Nanoparticles ; Ventilation
中文摘要: The proliferation of 3D printing MakerSpaces in university settings has led to an increased risk of student and technician exposure to ultrafine particles. New MakerSpaces do not have standardized specifications to aid in the design of the space; therefore, a need exists to characterize the impacts of different engineering controls on MakerSpace air quality. This study compares three university MakerSpaces: a library MakerSpace operating ≤4 devices under typical office space ventilation with no engineering controls, a laboratory MakerSpace operating 29 printers inside grated cabinets, with laboratory-grade ventilation, and a center MakerSpace operating ≤4 devices with neither engineering controls nor internal ventilation. All MakerSpaces were studied under both controlled (using a standard print design) and uncontrolled (real-time user operation) conditions measuring emitted particle concentrations in the near-field. Additionally, volatile organic emissions and the difference between near-field and far-field particle concentrations were investigated in multiple MakerSpaces. The center MakerSpace had the greatest net increase in mean particle number concentration (+1378.9% relative to background during a print campaign using polylactic acid (PLA) filament in a MakerBot (MakerBot-PLA)). The number-weighted mean diameter had the greatest change relative to background during the library campaign, +37.1% for the Lulzbot-PLA and −56.1% for the Ultimaker-PLA studies. For the standard NIST design with MakerBot-PLA, the laboratory's particle removal ratio was 30 times greater than in the library with open cabinets and 54 times greater when the cabinet doors were closed. The average particle removal rate from the center MakerSpace was up to 2.5 times less efficient than that of the library for the same MakerBot-PLA combination. These results suggest ventilation as a key priority in the design of a new university MakerSpace. © 2020 Elsevier Ltd
Citation statistics:
资源类型: 期刊论文
标识符: http://119.78.100.158/handle/2HF3EXSE/160459
Appears in Collections:气候变化与战略

Files in This Item:

There are no files associated with this item.


作者单位: Department of Chemical and Life Science Engineering, Virginia Commonwealth University, 601 W. Main St, Richmond, VA 23284, United States; Department of Chemistry, Virginia Commonwealth University, 1001 W. Main St, Richmond, VA 23284, United States; James Branch Cabell Library, Virginia Commonwealth University, 901 Park Ave, Richmond, VA 23284, United States; da Vinci Center, Virginia Commonwealth University, 807 S Cathedral Pl, Richmond, VA 23284, United States; Environmental Health and Safety, Safety and Risk Management, Virginia Commonwealth University, 1008 East Clay Street Box 980112, Richmond Va, 23298, United States; Department of Mechanical and Nuclear Engineering, Virginia Commonwealth University, 401 W. Main St, Richmond, VA 23284, United States

Recommended Citation:
Secondo L.E.,Adawi H.I.,Cuddehe J.,et al. Comparative analysis of ventilation efficiency on ultrafine particle removal in university MakerSpaces[J]. Atmospheric Environment,2020-01-01,224
Service
Recommend this item
Sava as my favorate item
Show this item's statistics
Export Endnote File
Google Scholar
Similar articles in Google Scholar
[Secondo L.E.]'s Articles
[Adawi H.I.]'s Articles
[Cuddehe J.]'s Articles
百度学术
Similar articles in Baidu Scholar
[Secondo L.E.]'s Articles
[Adawi H.I.]'s Articles
[Cuddehe J.]'s Articles
CSDL cross search
Similar articles in CSDL Cross Search
[Secondo L.E.]‘s Articles
[Adawi H.I.]‘s Articles
[Cuddehe J.]‘s Articles
Related Copyright Policies
Null
收藏/分享
所有评论 (0)
暂无评论
 

Items in IR are protected by copyright, with all rights reserved, unless otherwise indicated.